Print media are essentially PVC-coated fabrics such as backlit, frontlit and side-curtains.
Print media have nearly the same requirements as PVC-coated tarpaulins. In addition, the various large format printing systems must be able to print on the lacquered surfaces. The lacquer system has to ensure that the print comes out splendidly and the ink adheres well. The features of the printed material should remain unchanged even after the lacquered goods have been stored for a long while. The lacquer coating should ensure that the print profiles are as similar as possible, regardless what base material is used. For this application lacquers from the ROWAKRYL® series specifically optimized for printability are recommended.
Product designation | ROWAKRYL® G-35167 |
Solids [%] | 15.6 |
Solvents | MEK, PMA, Acetone |
Recommended applications / Properties | Backlit, frontlit, side-curtain |
Product designation | ROWAKRYL® G-35376 |
Solids [%] | 18.6 |
Solvents | MEK, PMA, Acetone |
Recommended applications / Properties | Backlit, frontlit, side-curtain |
Product designation | ROWAKRYL® M-35377 |
Solids [%] | 20.5 |
Solvents | MEK, PMA, Acetone |
Recommended applications / Properties | Backlit, frontlit, side-curtain |
Product designation | ROWAKRYL® M-35023W |
Solids [%] | 23.0 |
Solvents | Water, EDG |
Recommended applications / Properties | Backlit, frontlit (water-based) |
Product designation | ROWAKRYL® G-35150W |
Solids [%] | 21.5 |
Solvents | Water, EDG |
Recommended applications / Properties | Backlit, frontlit (water-based) |
As a result of continuous optimization and further development, the products shown in the tables are exclusively SVHC-free lacquer systems.
Our product recommendations and technical advice are based on careful investigation and are to our best knowledge but are without guarantee. Users have to test for themselves whether our products perform properly in their application.